wiki2.b2bOptic.com

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== edging (Edging) ======

[[en:lensorder:version010601:structure|b2boptic]] -> [[en:lensorder:version010601:structure|items]] -> [[en:lensorder:version010601:complextypes:item|item]] -> [[en:lensorder:version010601:complextypes:pair|pair]] -> edging

{{:en:lensorder:version010601:complextypes:xsd_edging.png?nolink|Edging}}

^ //reTrace// ^^
^ type | boolean |
^ use | optional |
^ default | false |
^ description |  |

^ // [[en:lensorder:version010601:simpletypes:edgingtype|edgingType]] // ^^
^ type | [[en:lensorder:version010601:simpletypes:edgingtype|EdgingType]] |
^ use | required |
^ description |  |

^ [[en:lensorder:version010601:complextypes:bevel|bevel]] ^^
^ type | [[en:lensorder:version010601:complextypes:bevel|Bevel]] |
^ occurs | 1 |
^ description |  |

^ polish ^^
^ type | boolean |
^ default | false |
^ occurs | 0..1 |
^ description |  |

^ drilling ^^
^ type | boolean |
^ default | false |
^ occurs | 0..1 |
^ description | if value is true then "drillHoles" is used for drilling. Otherwise "drillHoles" is just for calculations |

^ [[en:lensorder:version010601:simpletypes:chamferintensity|chamfer]] ^^
^ type | [[en:lensorder:version010601:simpletypes:chamferintensity|ChamferIntensity]] |
^ occurs | 0..1 |
^ description |  |

^ // [[en:lensorder:version010601:simpletypes:chamferpos|position]] (attribute of chamfer) // ^^
^ type | [[en:lensorder:version010601:simpletypes:chamferpos|ChamferPos]] |
^ use | optional |
^ default | BOTH |
^ description |  |

<code xml>
<xs:complexType name="Edging">
  <xs:sequence>
    <xs:element name="bevel" type="Bevel" />
    <xs:element minOccurs="0" default="false" name="polish" type="xs:boolean" />
    <xs:element minOccurs="0" default="false" name="drilling" type="xs:boolean" />
    <xs:element minOccurs="0" name="chamfer">
      <xs:complexType>
        <xs:simpleContent>
          <xs:extension base="ChamferIntensity">
            <xs:attribute default="BOTH" name="position" type="ChamferPos" use="optional" />
          </xs:extension>
        </xs:simpleContent>
      </xs:complexType>
    </xs:element>
  </xs:sequence>
  <xs:attribute default="false" name="reTrace" type="xs:boolean" use="optional" />
  <xs:attribute name="edgingType" type="EdgingType" use="required" />
</xs:complexType>
</code>